Assays

RNA timeseries data for Arabidopsis Col wild-type plants and clock mutants, as separate mean and SD files. The raw data is available on BioDare.ed.ac.uk, and is linked as 'Attribution' from elsewhere on FAIRDOMHub.

The starting models are included here in their original forms, the P2011 model as an SBML L3V1 model file, and the KF2014 model of Fogelmark et al. shared as SBML; both prepared by Uriel Urquiza.

P2011.1.2 written in Antimony and converted in SBML using python package Tellurium. Parameters values correspond to P2011.1.2

Collection of clock models that rescale transcript variables to account for absolute units. The relationship between models is summarised in the attached 'model evolution' document and in more detail in the linked publications (preprint version linked in the Snapshot; publication Urquiza and Millar, In Silico Plants 2021 did not have a DOI when Snapshot was created).

Each model is presented three times,

• • without a light:dark cycle,
• • with an ISSF (Adams et al. JBR 2012) that is set up for ...

This section contains the links to the tools used for reproducing the computational results presented in U2019. This is required because SloppyCell is under the risk of becoming rotting code. Using Docker we can assure some persistence for the computational environment that allows to run SloppyCell.

The associated git repository can be found in https://github.com/jurquiza/Urquiza2019a.git which can be cloned.

The docker image can either be pulled from the docker hub site

docker pull ...

Model files for FMv1.5. The model is based on FMv1 of Chew et al. PNAS 2014, which is also in FAIRDOMHub and linked to the Model record as an 'Attribution'. FMv1 was extended in this work by Hannah Kinmonth-Schultz and Daniel Seaton, in Matlab.

Plant material The same plant material used for transcriptome analysis in (Flis et al., 2016) was the basis of our proteome study. Briefly, Arabidopsis thaliana Col-0 plants were grown on GS 90 soil mixed in a ratio 2:1 (v/v) with vermiculite. Plants were grown for 1 week in a 16 h light (250 μmol m−2 s−1, 20 °C)/8 h dark (6 °C) regime followed by an 8 h light (160 μmol m−2 s−1, 20 °C)/16 h dark (16 °C) regime for one week. Plants were then replanted with five seedlings per pot, transferred for ...

The models in this record were published in Flis et al. Royal Society Open Biology 2015. They will be submitted to Biomodels when we have a PubMed ID for the paper.

Original model: Arabidopsis clock model P2011.1.1 from Pokhilko et al. Mol Syst. Biol. 2012, http://dx.doi.org/10.1038/msb.2012.6

Published version is Biomodels ID 00412, http://www.ebi.ac.uk/compneur-srv/biomodels-main/BIOMD0000000412 Also public in Plasmo as PLM_64, with several versions, http://www.plasmo.ed.ac.uk/plasmo/models/model.shtml?accession=PLM_64 ...

The models in this record were published in Flis et al. Royal Society Open Biology 2015. They will be submitted to Biomodels when we have a PubMed ID for the paper.

Original model: Arabidopsis clock model P2011.1.1 from Pokhilko et al. Mol Syst. Biol. 2012, http://dx.doi.org/10.1038/msb.2012.6

Published version is Biomodels ID 00412, http://www.ebi.ac.uk/compneur-srv/biomodels-main/BIOMD0000000412 Also public in Plasmo as PLM_64, with several versions, http://www.plasmo.ed.ac.uk/plasmo/models/model.shtml?accession=PLM_64 ...

This model is one of five new parameter sets for P2011, published in Flis et al. Royal Society Open Biology 2015. They will be submitted to Biomodels when we have a PubMed ID for the paper. Derived from Original model: P2011.1.2 is public model ID PLM_71 version 1, http://www.plasmo.ed.ac.uk/plasmo/models/download.shtml?accession=PLM_71&version=1 This model P2011.6.1 is public model ID PLM_1044, with parameters optimised by Kevin Stratford using SBSInumerics software on the UK national ...

This model is one of five new parameter sets for P2011, published in Flis et al. Royal Society Open Biology 2015. They will be submitted to Biomodels when we have a PubMed ID for the paper. Derived from Original model: P2011.1.2 is public model ID PLM_71 version 1, http://www.plasmo.ed.ac.uk/plasmo/models/download.shtml?accession=PLM_71&version=1 This model P2011.3.1 is public model ID PLM_1041, with parameters optimised by Kevin Stratford using SBSInumerics software on the UK national ...

This model is termed P2011 and derives from the article: The clock gene circuit in Arabidopsis includes a repressilator with additional feedback loops. Alexandra Pokhilko, Aurora Piñas Fernández, Kieron D Edwards, Megan M Southern, Karen J Halliday & Andrew J Millar Mol. Syst. Biol. 2012; 8: 574, submitted 9 Aug 2011 and published 6 March 2012. Link Link to Supplementary Information, including equations. Minor errors in the published Supplementary Information are described in a file attached ...

Photothermal model for Arabidopsis development, as published, converted to Simile format by Yin-Hoon Chew. Note that the XML file is just a dummy SBML file, the .SML is the working model file. Simile can read csv files (as attached) for meteorological data (hourly temperature, sunrise, sunset). Users only need to change the directory of the input variables. I have also attached the set of parameter values for each genotype.Related PublicationsWilczek et al. (2009). Effects of Genetic Perturbation ...

Photothermal model for Arabidopsis development, as published, converted to Simile format by Yin-Hoon Chew. Note that the XML file is just a dummy SBML file, the .SML is the working model file. Simile can read csv files (as attached) for meteorological data (hourly temperature, sunrise, sunset). Users only need to change the directory of the input variables. I have also attached the set of parameter values for each genotype.Related PublicationsWilczek et al. (2009). Effects of Genetic Perturbation ...

Detailed model of starch metabolism from Sorokina et al. BMC Sys Bio 2011. First upload is a draft.

Related Publications
Sorokina et al (2011). BMicroarray data can predict diurnal changes of starch content in the picoalga Ostreococcus.. BMC Systems Biology. Retrieved from: http://www.ncbi.nlm.nih.gov/pubmed/21352558

Originally submitted to PLaSMo on 2011-08-12 15:34:00

The model shows how the CONSTANS gene and protein in Arabidopsis thaliana forms a day-length sensor. It corresponds to Model 3 in the publication of Salazar et al. 2009. Matlab versions of all the models in the paper are attached to this record as a ZIP archive, as are all the data waveforms curated from the literature to constrain the model. Further information may be available via links from the authors web site (www.amillar.org). Simulation notes for SBML version of Model3 from Salazar et al., ...

The model shows how the CONSTANS gene and protein in Arabidopsis thaliana forms a day-length sensor. It corresponds to Model 3 in the publication of Salazar et al. 2009. Matlab versions of all the models in the paper are attached to this record as a ZIP archive, as are all the data waveforms curated from the literature to constrain the model. Further information may be available via links from the authors web site (www.amillar.org). Simulation notes for SBML version of Model3 from Salazar et al., ...

Andrew's work-in-progress P2012 version. NB KNOWN PROBLEMS do not use lightly. Derived from PLM_49, after removing ABA regulation and tidying up the SBML in COPASI. Please see version comments for IMPORTANT notes.Comments No parameters constrained in version 1 file. 2013-02-26 17:31:26 3 amillar2 andrew.millar@ed.ac.uk Compiled successfully in SBSI for optimisation. 2013-02-26 17:28:18 3 amillar2 andrew.millar@ed.ac.ukVersion Comments Version 2 is file P2012_fin_NoABAv4.xml of 6th March.

It ...

Andrew's work-in-progress P2012 version. NB KNOWN PROBLEMS do not use lightly. Derived from PLM_49, after removing ABA regulation and tidying up the SBML in COPASI. Please see version comments for IMPORTANT notes.Comments No parameters constrained in version 1 file. 2013-02-26 17:31:26 3 amillar2 andrew.millar@ed.ac.uk Compiled successfully in SBSI for optimisation. 2013-02-26 17:28:18 3 amillar2 andrew.millar@ed.ac.ukVersion Comments Version 1 is file P2012_NoSinkNoABAParamsNom38_freshCopasi.xml ...

Draft of MEP pathway for isoprenoid synthesis, created 2012-2013 by Oender Kartal in the Gruissem lab. He notes "It contains some annotations and references for the parameter values and rate equations and produces a stable steady state, so you can do some control analysis. It simulates day-metabolism, since the MEP Pathway is supposedly active during the day." Unpublished, for use by TiMet consortium only.

Originally submitted to PLaSMo on 2013-09-13 09:10:53

This is a version derived from a model from the article: Experimental validation of a predicted feedback loop in the multi-oscillator clock of Arabidopsis thaliana. Locke JC, Kozma-Bognár L, Gould PD, Fehér B, Kevei E, Nagy F, Turner MS, Hall A, Millar AJ Mol. Syst. Biol.2006;Volume:2;Page:59 17102804,   The model describes a three loop circuit of the Arabidopsis circadian clock. It provides initial conditions, parameter values and reactions for the production rates of the following species: LHY ...

This version is derived from a model from the article: Extension of a genetic network model by iterative experimentation and mathematical analysis. Locke JC, Southern MM, Kozma-Bognár L, Hibberd V, Brown PE, Turner MS, Millar AJ Mol. Syst. Biol. 2005; 1: 2005.0013 16729048,  SBML model of the interlocked feedback loop network The model describes the circuit depicted in Fig. 4 and reproduces the simulations in Figure 5A and 5B. It provides initial conditions, parameter values and rules for the ...

Temperature-sensitive version of Pokhilko 2010 Arabidopsis clock model, from Biomodels BIOMD00273, prepared by Mirela Domijan for the Gould et al. paper on cryptochrome influences on circadian rhythms.    Molecular Systems Biology 9 Article number: 650  doi:10.1038/msb.2013.7 Published online: 19 March 2013 Citation: Molecular Systems Biology 9:650 Network balance via CRY signalling controls the Arabidopsis circadian clock over ambient temperatures Gould, Ugarte, Domijan et al. doi:10.1038/msb.2013.7Version ...

Temperature-sensitive version of Pokhilko 2010 Arabidopsis clock model, from Biomodels BIOMD00273, prepared by Mirela Domijan for the Gould et al. paper on cryptochrome influences on circadian rhythms.    Molecular Systems Biology 9 Article number: 650  doi:10.1038/msb.2013.7 Published online: 19 March 2013 Citation: Molecular Systems Biology 9:650 Network balance via CRY signalling controls the Arabidopsis circadian clock over ambient temperatures Gould, Ugarte, Domijan et al. doi:10.1038/msb.2013.7Originally ...

A cell-level model of the Arabidopsis root elongation zone. This spatial model is divided up into biological cells which are further divided into simulation boxes. The original model was designed to investigate how canal cells can accumulate auxin over time rather than to investigate the transport of auxin through the canal cells per se. The main outputs of the simulations in the original paper were the steady state ratios of auxin in the canal cell protoplasts to that in the parenchyma cell ...

A cell-level model of the Arabidopsis root elongation zone. This spatial model is divided up into biological cells which are further divided into simulation boxes. The original model was designed to investigate how canal cells can accumulate auxin over time rather than to investigate the transport of auxin through the canal cells per se. The main outputs of the simulations in the original paper were the steady state ratios of auxin in the canal cell protoplasts to that in the parenchyma cell ...

Andrew's "ongoing work" record for the P2011 clock model. Many different versions, with annotations made during SBSI development in 2011-2013 - see version records.

Version Comments

Corrected m1 parameter and range, tested in SBSI

Andrew's "ongoing work" record for the P2011 clock model. Many different versions, with annotations made during SBSI development in 2011-2013 - see version records.Version Comments Derived from PLM_67v3 - LDLL transition at 314h, with wider parameter ranges, as used in LDLL_run2 - but with one modification in Copasi, to cL_m degradation to ensure light rate > dark rate. Value of m1 previously 0.54, now 0.3. Simulation in Copasi was identical.

Copasi file also attached. Originally submitted to ...

Andrew's "ongoing work" record for the P2011 clock model. Many different versions, with annotations made during SBSI development in 2011-2013 - see version records.Version Comments PLM_67v3 model, with TWO stepfunctions. Simulates fine but as of 21 March 2013 did not optimise.

Step2 is usually off because amplitude=0, but can produce LD-DD transition at 262h. To do so, initiate with amplitudeStep1=0 and amplitudeStep2=1.

NB the step1 will still go to LL at 314h, so need to stop DD costing before ...

Andrew's "ongoing work" record for the P2011 clock model. Many different versions, with annotations made during SBSI development in 2011-2013 - see version records.

Version Comments

PLM_67v2 set up for LDLL transition at 314h, with wider parameter ranges for most parameters. This is the model file used in LDLL_run2.