Data files

Data file for PLaSMo accesssion ID PLM_70, version 1

Data file for PLaSMo accesssion ID PLM_64, version 4

Data file for PLaSMo accesssion ID PLM_64, version 4

Data file for PLaSMo accesssion ID PLM_64, version 4

Data file for PLaSMo accesssion ID PLM_64, version 4

Data file for PLaSMo accesssion ID PLM_64, version 3

Data file for PLaSMo accesssion ID PLM_64, version 3

Data file for PLaSMo accesssion ID PLM_64, version 3

Data file for PLaSMo accesssion ID PLM_64, version 3

Data file for PLaSMo accesssion ID PLM_64, version 3

Data file for PLaSMo accesssion ID PLM_64, version 1

Data file for PLaSMo accesssion ID PLM_64, version 1

Data file for PLaSMo accesssion ID PLM_64, version 1

Data file for PLaSMo accesssion ID PLM_64, version 1

Data file for PLaSMo accesssion ID PLM_64, version 1

Data file for PLaSMo accesssion ID PLM_71, version 2

Data file for PLaSMo accesssion ID PLM_71, version 2

Data file for PLaSMo accesssion ID PLM_1045, version 1

Data file for PLaSMo accesssion ID PLM_1045, version 1

Data file for PLaSMo accesssion ID PLM_1045, version 1

Data for Figs. 2I, 2J, 2K in Chew et al. PNAS 2014 Fresh biomass, dry biomass (i.e. after baking out all water), SLA - specific leaf area (area per g)

The same data are available on the BioDare resource, with additional experimental meta data on growth conditions. BioDare ID 13790828881028, title "Physiology experiment using Col", the direct link is: https://www.biodare.ed.ac.uk/robust/ShowExperiment.action?experimentId=13790828881028

Data for Figs. 3D, 3E in Chew et al. PNAS 2014 Fresh biomass, dry biomass (i.e. after baking out all water), SLA - specific leaf area (area per g) Also FMv1 model simulation results.

The same data are available on the BioDare resource, with additional experimental meta data on growth conditions. BioDare ID 13790837647786, title "Physiology experiment using Fei", the direct link is: https://www.biodare.ed.ac.uk/robust/ShowExperiment.action?experimentId=13790837647786

Data for Figs. 3A, 3B in Chew et al. PNAS 2014 Fresh biomass, dry biomass (i.e. after baking out all water), SLA - specific leaf area (area per g)

Also contains model simulation data from the FMv1 The same data are available, with additional experimental meta data on growth conditions, from the BioDare resource: BioDare experiment 13790834110003; title "Physiology experiment using Ler", the direct link is: https://www.biodare.ed.ac.uk/robust/ShowExperiment.action?experimentId=13790834110003

Intact rosette is pictured, with plant number and genotype in handwritten labels, and ruler for scale. Then dissected leaves are organised in sequence of age, if necessary with small cuts to let them lie flat. Areas are then measured in image processing.

Data for Figs 3C, 3F and Supp 2 in Chew et al. PNAS 2014 Leaf number of the growing rosettes, from 4 to 37 days after sowing (DAS). Data and also results of FMv1 model simulations. Note that Fei-0 was previously tested by Mendez-Vigo et al, suggesting this line had a higher leaf appearance rate. We suggested that its larger final leaf number was more likely due to faster germination.

binary data file from "Hobo" environment multi-sensor + data logger, located next to the plants used in the experiment. Usually read in HOBOware software, free from Onsetcomp.com. Useful temperature record. Though light levels can usefully show changes they are not well calibrated.

Fig 5D

Figure 5D

Data for Fig. Supp 7B in Chew et al. PNAS 2014 Leaf number of the growing rosettes, from 5 to 37 days after sowing. Data and also results of three FMv1 model simulations, with default, fitted and linear (i.e. no juvenile-adult transition in phyllochron)

Data for Figs. 5D, 5E and Supp 7C in Chew et al. PNAS 2014 FW - fresh weight DW - dry weight (i.e. after baking out all water) SLA - specific leaf area (area per g mass), indicates leaf thickness Indiv, data for individual leaves rather than rosette