Data files

Transformation of RLU into absolute units using a calibration curve of recombinant MBP-NanoLUC-3FLAG-10His

"Samples of plants were collected in pre-weighed 2 ml microfuge tubes (safelock, Eppendorf) with 5 mm stainless steel grinding balls, and flash frozen in liquid nitrogen. The tissue was ground twice at 30Hz for 1 min in a Tissue Lyser (Qiagen). The samples were flash frozen between grinding steps, then placed on ice and 150 μl of BSII buffer was added to protect the samples from proteolysis, without phosphatase inhibitors (Huang et al. 2016). The tube was weighed and further BSII buffer added to ...

"Plates inoculated with Col-0 seed were grown under the same photoperiod conditions to the plants to be analysed. Plant tissue was harvested, making aliquots of 0.4 gFW. MBP-NL3F10H protein was prepared by the method described by Urquiza-Garcia U. and Millar A.J. in Plant Methods 2019. and then quantified by the linearized Bradford assay protocol using both Bovine serum albumin BSA and Ovoalbumin as standards (Ernst & Zor 2010). Then aliquots spiked with purified enzyme to generate a curve ...

Analysis of carbon metabolites in clock mutants by Anna Flis and Ronan Sulpice, Mark Stitt lab

Excel workbook with included Read.Me sheet, including FW and DW biomass data derived from files linked elsewhere; a compilation of the rosette area and gas exchange data for every plant measured of the Col, lsf1 and prr7prr9 genotypes; statistical analysis across the experiments; and charts of the compiled data, some of which are presented as figure panels in the 2022 versions.

Biomass data for individual plants at day 35, fresh and dry weights, as well as mean and SD, from study Gibberellins 1

Excel sheet with mean and SD biomass data and charts, individual metabolite replicates, mean, SD and charts Details on Read.ME worksheet

For Chew, Seaton et al. Figure 1

RNA levels for control amplicons and multiple clock genes in 2 WT (Col, Ws) and 5 clock mutants of Arabidopsis, in biological duplicates, from three conditions: Diurnal cycle (12L/12D), Extended night (DD), Extended light (LL), harvested every 2 hours. Numbers are in transcript copy per cell, obtained assuming 1 g FW contains 25000000 cells. Comments: Data from LD are concateneted with DD and LL for better visualization. Toc1-101 (col-0) gi-201 (col-0) prr7-3 prr9-1 (col-0) , lhy cca1 (ws) elf3-4 ...

for Chew, Seaton et al. paper Figure 1

For Chew, Seaton et al. Figure 1

SD values of clock gene RNA data in absolute units of RNA copies per cell (calculated from copies per gFW, / 25 million cells/gFW) from TiMet WP1.1, RNA dataset ros (from rosettes). Note the Col data are from WP1.1, not substituted with Col from the LD12:12 of the WP1.2 photoperiod data set, as they were in Flis et al. 2015. Note also that cL_m in these data is taken from CCA1 only, not the average of CCA1 and LHY as in the data sets used for optimisation of P2011.2.1 in Flis et al. 2015.

The ...

Mean values of clock gene RNA data in absolute units of RNA copies per cell (calculated from copies per gFW, / 25 million cells/gFW) from TiMet WP1.1, RNA dataset ros (from rosettes). Note the Col data are from WP1.1, not substituted with Col from the LD12:12 of the WP1.2 photoperiod data set, as they were in Flis et al. 2015. Note also that cL_m in these data is taken from CCA1 only, not the average of CCA1 and LHY as in the data sets used for optimisation of P2011.2.1 in Flis et al. 2015.

The ...

Data curation notes provided by Alex Graf via Willi Gruissem, in addition to the PRIDE deposition.

The Excel file gives the list of samples uploaded into PRIDE. here - https://fairdomhub.org/data_files/3704

The published experimental design might lead one to expect 4x3x2x7 = 168 samples. There are more than 168 samples in the PRIDE upload for the following reasons:

First, all of the measurements from the experiment had been uploaded, including files for measurements that were repeated because of ...

Data file for PLaSMo accesssion ID PLM_9, version 1

Data file for PLaSMo accesssion ID PLM_9, version 1

Data file for PLaSMo accesssion ID PLM_8, version 1

Data file for PLaSMo accesssion ID PLM_30, version 1

Data file for PLaSMo accesssion ID PLM_30, version 1

Data file for PLaSMo accesssion ID PLM_30, version 1

Data file for PLaSMo accesssion ID PLM_30, version 1

Data file for PLaSMo accesssion ID PLM_70, version 2

Data file for PLaSMo accesssion ID PLM_70, version 1

Data file for PLaSMo accesssion ID PLM_70, version 1

Data file for PLaSMo accesssion ID PLM_70, version 1

Data file for PLaSMo accesssion ID PLM_70, version 1

Data file for PLaSMo accesssion ID PLM_70, version 1

Data file for PLaSMo accesssion ID PLM_64, version 4

Data file for PLaSMo accesssion ID PLM_64, version 4